Alternatively, you can provide the Internet name of the gateway. The Internet name is the Fully
Qualified Domain Name (FQDN); for example, vpn.netgear.com.
7. Enter the Local WAN IP Address or Internet name.
Both local and remote ends should be defined as either IP addresses or Internet Names
(FQDN). A combination of IP address and Internet Name is not permissible.
8. Click Apply.
The VPN Policies screen is displayed showing that the Client policy "home" has been added
and enabled.
Figure 6-5
To view the "home" policy:
1. Click Edit in the Action column adjacent to the "home" policy to view the "home" policy
parameters.
The Edit VPN Policy screen is displayed. It should not be necessary to make any changes.
Virtual Private Networking Using IPsec
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
v1.0, July 2008
6-7