Table of Contents
Advertisement
Gateway
The gateway address is set when the cluster is created.
The gateway option displays the gateway address.
Recover cluster?
The Recover cluster? option is useful if the administrator password has been lost
or forgotten.
This field allows you to recover a lost administrator password or make the node
accessible via the service password.
Figure 104 shows the Recover cluster? menu sequence.
Figure 104. Recover Cluster? menu sequence
You do not need to use this field during installation. For more information about
the Recover cluster? field, see the IBM System Storage SAN Volume Controller: Service
Guide.
Node options
The node option displays the identification number or name of the SAN Volume
Controller.
The main node option displays the identification number of the SAN Volume
Controller or the name of the SAN Volume Controller if the user has assigned a
name.
Status
Use the status to diagnose cluster failures.
Active
v The SAN Volume Controller is operational and assigned to a cluster. It has
Inactive
v The SAN Volume Controller is operational and assigned to a cluster. It has no
Free
v The SAN Volume Controller is operational, but has not been assigned to any
Disconnected
v The SAN Volume Controller is operational, but has not been assigned to any
Failed
146
IBM System Storage SAN Volume Controller: Hardware Installation Guide
Recover Cluster?
Select
Service Access
access to the fibre-channel fabric.
access to the fibre-channel fabric.
cluster. It has access to the fibre-channel fabric.
cluster. It has no access to the fibre-channel fabric.
Hide quick links:
Advertisement
Table of Contents
