Table of Contents
Advertisement
Each button corresponds to the direction that you can move in a menu. For
example, to move right in a menu, press the navigation button that is located on
the right side. If you want to move down in a menu, press the navigation button
that is located on the bottom.
Note: The select button is used in tandem with the navigation buttons.
Product serial number
The node contains a SAN Volume Controller product serial number that is
imbedded on the system board hardware.
This number is used for warranty and service entitlement checking and is included
in the data sent with error reports. It is essential that this number is not changed
during the life of the product. If the system board is replaced, you must follow the
system board replacement instructions carefully and rewrite the serial number on
the system board.
SAN Volume Controller 2145-8F4 and SAN Volume Controller
2145-8F2 operator information panel
The operator information panel contains indicators and buttons for the SAN
Volume Controller 2145-8F4 or SAN Volume Controller 2145-8F2.
Figure 39 shows the operator panel used by the SAN Volume Controller 2145-8F4
and the SAN Volume Controller 2145-8F2 models.
8
Figure 39. SAN Volume Controller 2145-8F4 and SAN Volume Controller 2145-8F2 operator
information panel
1
Release latch for light path diagnostics panel
2
System-error LED (amber)
3
Information LED (amber)
4
Location LED (blue)
5
Hard disk drive activity LED (green)
6
Power control button
7
Power LED (green)
8
USB connector
Release latch
The release latch gives you access to the light path diagnostics panel, which
provides a preliminary method of determining the location of a problem.
Appendix A. SAN Volume Controller 2145-8F4 and SAN Volume Controller 2145-8F2
5
2
6
4
3
7
1
69
Hide quick links:
Advertisement
Table of Contents
