Advertisement
Step 13: Rear Siding
You will need for this page:
SS
(QTY: 24)
(QTY: 28)
1
Slide bottom Rear Siding Panels into channels of Corner Posts and Splice Post as shown.
Once in place, secure with four (4) Vanilla Screws per Panel. Screws going into bottom Floor
Frame also secure Stud Assemblies.
2
Slide remaining Panels into channels, making sure Siding Panels overlap as shown. Once
overlapped, fasten each Panel using four (4) Vanilla Screws as before.
3
Secure the tops of Panels to Rear Wall Angle using an additional two (2) Vanilla Screw per
Panel.
4
From inside building, fasten all Rear Siding Panels to Corner Posts and Splice Post using four
(4) Stone Screws per Panel.
Be certain all Siding Panels are
completely overlapped or holes
will not line up.
Screws also secure
Stud Assemblies to
Floor Frame.
10792
VS
Rear Siding
VS
VS
6
10792
10792
VS
10792
SS
6
26
10792
10792
10792
SS
26P
Advertisement
