Advertisement
Step 9: Posts/Frame
You will need for this page:
SS
(QTY: 22)
1
Position Right and Left Corner Posts
at the corner of the Floor Frame as
shown. The angled end of each Post
must be placed on top of all four (4)
corners. Fasten the Corner Post to
the Floor Frame using two (2) Stone
Screws in each Post.
The Floor Frame must be square
and level or holes will not align.
Support the Corner Posts with
stakes or other devices until
Door Jambs are attached.
Long leg of Rear Wall Assembly
and Side Wall Angles faces
down.
9912
2
5284
5285
Right Corner
Left Corner
Post
9912
Leg of Header Assembly
to inside of building and
faces down.
2
2
9912
Side Wall
Post
Angle
5285
2
Fasten Header Assembly to top of front
Corner Posts through top holes using two
(2) Stone Screws.
3
Fasten Rear Wall Angle Assembly to top
of back Corner Posts using two (2) Stone
Screws in each post.
4
Fasten Side Wall Angles to top of side
Corner Post using two (2) Stone Screws
in each Post.
Side Wall Angle on top
6
22
Assemblies from step 2:
•
Header Assembly (1)
•
Rear Wall Angle
Assembly (1)
5284
5284
Wall Angles must face inside
building.
22P
5285
Advertisement
