Advertisement
Step 12: Side Siding
You will need for this page:
SS
VS
(QTY: 30)
(QTY: 24)
1
Slide bottom Side Siding into channels of Corner Posts as shown. Once in place, secure with
four (4) Vanilla Screws. Screws going into bottom Floor Frame also secure Stud Assemblies.
2
Slide remaining Panels into channel, making sure Siding Panels overlap as shown. Once
overlapped, fasten Panels using four (4) Vanilla Screws as before.
3
Secure both top Panels to Side Wall Angle using an additional three (3) Vanilla Screws per
Panel.
4
From inside building, fasten all Side Siding Panels to Corner Posts using four (4) Stone Screws
per Panel.
10787
10787
10787
Fasten all Panels from
SS
inside with four (4) Stone
Screws per Panel.
6
10787
Side Siding
10787
SS
10787
10787
25
Washers are to be used on painted
parts only. Washers are not necessary
on unpainted parts and there are not
enough to use on every Screw and Bolt.
VS
VS
6
Be certain all Siding Panels are
completely overlapped or holes
will not line up.
Screws also secure
Stud Assemblies to
Floor Frame.
25P
Advertisement
