Advertisement
Step 1:
You will need for this page:
SB
(QTY: 8)
1
Join two (2) Front/Rear Floor Frames together by overlapping them as shown and secure the
Frames with four (4) Stone Bolts and Nuts. Repeat this for the other two (2) Front/Rear Floor
Frames.
9377
BUILD TWO (2) ASSEMBLIES
2
Check the overall length of each set of Floor Frames to make sure they are at the proper length
of 95 7/8" (243,5 cm).
Floor Frame Pre-Assembly
4
9377
Front/Rear
Floor Frame
6
13
Washers are to be
used
on
parts only. Washers
are not necessary on unpainted
parts and there are not enough
to use on every Screw and Bolt.
9377
13P
painted
Advertisement
