Grizzly G0796 Owner's Manual page 65

11. Remove external retaining ring that secures
lower pulley to shaft (see Figure 100).
External
Retaining
Ring
Figure 100. Upper pulley removed to expose
retaining ring and lower pulley.
12. Use a press to remove shaft and bear-
ing sleeve assembly from pulley and brake
bracket (see Figure 101).
Shop
Press
Shaft
Bearing
Sleeve
Figure 101. Brake bracket mounted on shop
press for removal of shaft, bearing sleeve, and
lower pulley.
Model G0796/G0797 (Mfd. Since 1/18)
13. Remove and replace brake shoes (see
Figure 102).
Brake Shoes
Lower
Pulley
Figure 102. Lower pulley, shaft, and bear-
ing sleeve removed to expose brake shoes for
14. Use press to re-install shaft and bearing
sleeve assembly into brake bracket and
lower pulley (see Figure 103).
Shop
Press
Lower
Pulley
Figure 103. Using shop press to re-install shaft
with bearing assembly into brake bracket and
15. Re-assemble head in reverse order from
Steps 2–11.
inspection/replacement.
Bracket
lower pulley.
Brake
Shaft
-63-