Troubleshooting - Radio Shack TAD-1015 Owner's Manual

43-774.fm Page 28 Friday, August 13, 1999 3:14 PM

TROUBLESHOOTING

We do not expect you to have any problems with your TAD-1015, but if you do, try
these suggestions. If you still have problems, take your TAD-1015 to your local Ra-
dioShack store for assistance.
Problem
Noise, static, or weak signal
when the phone is away
from the base.
Noise, static, or weak signal
even when the phone is
near the base.
The TAD does not answer
calls.
The TAD does not record
callers' messages.
The handset does not ring
when you receive a call.
The caller's voice fades in
and out.
You hear other calls while
using your phone.
28
Suggestion
Move the handset closer to the base or relocate
the base.
Press to change the channel (see "Changing
CH
the Channel" on Page 15).
Make sure the base's antenna is fully extended.
Check all phone line connections.
Make sure the AC adapter and battery are prop-
erly connected.
Make sure the TAD is turned on.
Check the available memory and erase messages
as required.
The TAD is set to announcement only. Set
to or .
TIME 1 4
Check all phone line connections.
Make sure the AC adapter and battery are prop-
erly connected.
Unplug some of the other phones on the tele-
phone line.
Move the handset closer to the base or relocate
the base.
Press to change the channel (see "Changing
CH
the Channel" on Page 15).
Try another phone connected to the same line. If
you still hear other calls, the problem is probably in
your wiring or local service. Contact your local
telephone company.
REC