Chain-Dialing Service Numbers; Testing Stored Emergency Numbers; Using A Headset; Troubleshooting - Radio Shack 900 MHz Digital Spread Spectrum CordlessTelephone Owner's Manual

Sprint 900 mhz digital spread spectrum cordless telephone
Table of Contents

Advertisement

Chain-Dialing Service Numbers

For quick recall of numbers for special ser-
vices (such as alternate long distance or
bank-by-phone), store each group of num-
bers in its own memory location.
Dial the service's main number first. Then, at
the appropriate place in the call, press
and enter the memory location number (0–9)
for the stored information.
Testing Stored Emergency Num-
bers
If you store an emergency service's number
(police department, fire department, ambu-
lance) and you choose to test the stored
number, make the test call during the late
evening or early morning hours to avoid peak
demand periods. Also, remain on the line to
explain the reason for your call.

USING A HEADSET

You can talk with hands-free convenience
using an optional headset that has a
(2.5-mm) plug. Your local RadioShack store
carries a variety of suitable headsets.
ˆ

Troubleshooting

We do not expect you to have any problems with your phone, but if you do, the following sug-
gestions might help.
Problem
The phone does not work or works poorly.
14
To connect the headset, pull open the rubber
cover marked
then insert the headset's plug into the jack.
Notes:
• Connecting a headset disconnects the
handset's earpiece and microphone.
MEM
8 8 8 8
VOL
trols the connected headset's volume.
• If you place the handset on the base
while the headset is connected, be sure
the handset seats properly.
With a headset connected, you can make or
answer calls as usual using the keys on the
handset.
You can use a handset holder (available
from your local RadioShack store) to hang
the handset on your belt for greater conve-
nience.
When you finish using the headset, dis-
connect it and close the rubber cover to pro-
tect the jack.
3
/
-inch
32
Be sure the base's phone line cord and AC adapter are
correctly and securely connected, and the battery pack
in the handset is charged.
Return the handset to the base for a few seconds to
reset the security access-protection code.
Troubleshooting
.on the side of the handset,
9 9 9 9
or
on the handset also con-
Suggestion

Advertisement

Table of Contents
loading

This manual is also suitable for:

43-5518

Table of Contents