Radio Shack TAD-794 Owner's Manual

WARNING: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
CAUTION
!
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION
: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product's enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product's
case.
This symbol is intended to inform you
!
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
© 1998 Tandy Corporation.
All Rights Reserved.
COM-LOK and RadioShack are registered trademarks used by Tandy Corporation.
2
Important: Cordless phones such as
this one require AC power to operate.
When the AC power is off, you cannot
dial out or receive incoming calls using
your TAD-794. To be safe, you should
also have a phone that does not need
AC power to operate (not a cordless
phone) so you can still make and re-
ceive calls if there is an AC power fail-
ure.
Important Caller ID Information
To use the TAD-794's Caller ID and Call
Waiting with Caller ID features, you
must be in an area where those services
are available and you must subscribe to
those services through your local phone
company.
Where Caller ID is offered, one or more
options are generally available:
• caller's number only
• caller's name only
• caller's name and number
We recommend you record the TAD's
serial number here. The number is on
the bottom of the base.
Serial Number: __________________
900 MHz Caller ID/Call Waiting ID
with Digital Answering System
FEATURES
Your RadioShack TAD-794 900 MHz
Caller ID/Call Waiting ID Cordless
Phone combines a 900 MHz cordless
telephone with a Caller ID unit and a dig-
ital TAD (Telephone Answering Device).
The TAD-794's telephone uses ad-
vanced analog technology to give you
superior audio quality, while its cordless
operation lets you move freely around
your home or office.
The TAD-794's Caller ID unit records
each caller's telephone number (and
name, if available in your area) and the
day and time of the call, as provided by
your local phone company to Caller ID
service subscribers. And, if you have
Call Waiting with Caller ID, the TAD-794
shows you the incoming caller informa-
tion, even when you are already on the
phone.
The TAD stores up to 15 minutes of
messages on a computer chip and
records the day and time each message
was recorded. This gives you advanced
capabilities over tape-based answering
machines. For example, you can delete
individual messages and save the rest.
Because your TAD is fully digital, there
are no tapes to bother with and no tape
mechanisms to wear out.
And, the remote operation feature lets
you operate your TAD from a touch-tone
phone (or a rotary phone and pocket
tone dialer).
Cat. No. 43-794
OWNER'S MANUAL
Please read before using this equipment.
TAD -794

Cordless Phone

Telephone Features
900 MHz Operation — provides longer
range and less interference than many
other cordless phones.
Caller ID Memory — stores up to 30
Caller ID records.
Call Waiting ID — you can set the TAD-
794 to display Caller ID information
about an incoming call when you are on
the phone (if you subscribe to this ser-
vice from your local phone company).
Headset Jack — lets you connect an
optional headset (available at your local
RadioShack store) for hands-free con-
venience.
Easy-to-Read Liquid Crystal Display
— lets you see who is trying to reach
you before you answer the phone.
20 Number Memory Dialing — lets you
store up to 20 numbers in memory for
easy dialing.
Handset Volume Control — lets you
adjust the volume of the sound you hear
through the handset.
Ample Talk and Standby Time — the
supplied battery (when fully charged)
provides about 7 hours of talk time or 7
days of standby time.
40 Channels — the TAD-794 finds a
clear channel every time you make or
receive a call. You can also manually
change channels during a call.
3