Table of Contents
Advertisement
10
Dial the service's main number first. Then, when prompted
to enter the number, press
for the location where the additional information is stored.
6GUVKPI"5VQTGF"'OGTIGPE["0WODGTU
If you store an emergency service's number (police
department, fire department, ambulance) and you choose to
test the stored number, make the test call during the late
evening or early morning hours to avoid peak demand
periods. Also, remain on the line to explain the reason for
your call.
6417$.'5*116+0)
2TQDNGO"
Someone has picked up another phone
on the same line. Hang up the other
phone.
Low volume or unusual
sounds.
If you are using the headset, make
sure the headset's plug is properly
connected to the jack.
Keep the handset away from
computers, remote control toys,
wireless microphones, alarm systems,
intercoms, room monitors, fluorescent
Severe noise
lights, and electrical appliances.
interference.
Move to another location or turn off the
source of interference.
Press CH to change the channel.
Hang up and redial the number.
Be sure the base's phone line cord and
AC adapter are correctly and securely
connected.
Be sure the battery pack in the handset
The phone does not
is connected and charged.
work properly.
Return the handset to the base to reset
the security access-protection code.
Lift the base's antenna to a fully vertical
position
Check the charging contacts on the
handset and base. If they are dirty,
clean them with a pencil eraser.
The handset battery
Be sure the battery pack is connected
pack does not charge.
correctly.
Be sure the handset is properly seated
on the base.
and enter the number
MEMORY
5WIIGUVKQPU
Advertisement
Table of Contents
