Using Flash; Using Tone Services On A Pulse Line; Paging - Radio Shack TAD-1015 Owner's Manual

43-774.fm Page 16 Friday, August 13, 1999 3:14 PM

USING FLASH

performs the electronic equiva-
FLASH
lent of a switchhook operation for spe-
cial services, such as Call Waiting.
For example, if you have Call Waiting,
press FLASH to answer an incoming
call without disconnecting the current
call. Press again to return to
FLASH
the first call.
Note: If you do not have any special
phone services, pressing
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-
by-phone, require tone signals. If you
have pulse service, you can still use
these special tone services by follow-
ing these steps.
1. Be sure is set to
P T
2. Lift the handset from the base or
press TALK .
3. Dial the service's main number.
16
4. When the service answers, press
5. After you complete the call, return

PAGING

To send a page from the base to the
handset, when the phone is not in use,
might
FLASH
press
beeps five times. If you hold down
PAGE
handset beeps until you release it.
(pulse).
P
Note: Paging does not work while the
phone is in use.
TONE/ . Any additional numbers
you dial are sent as tone signals.
the handset to the base or press
TALK . The phone automatically
resets to the pulse mode.
on the base. The handset
PAGE
for more that 2 seconds, the