Mounting The Base On A Wall Plate - Radio Shack TAD-1015 Owner's Manual

43-774.fm Page 8 Friday, August 13, 1999 3:14 PM
4. Route the adapter's cord through
the strain relief slot on the back of
the base.
Strain Relief Slot
5. Plug the adapter into a standard
AC outlet. The POWER indicator
on the base lights.
6. Fully extend the base's antenna
and place it in a vertical position.
8
Mounting the Base
on a Wall Plate
To make this connection, you need a
short modular cord, such as Ra-
dioShack Cat. No. 279-390 (not sup-
plied).
1. Plug one end of the modular cord
into the jack on the back
TEL LINE
of the base.
2. Plug the supplied AC adapter's
barrel plug into the jack.
DC IN 9V