Mounting The Base Directly On The Wall - Radio Shack TAD-1015 Owner's Manual

43-774.fm Page 10 Friday, August 13, 1999 3:14 PM
Mounting the Base
Directly on the Wall
To mount the base directly on the wall,
you need two wood screws (not sup-
plied) with heads that fit into the key-
hole slots on the bottom of the base.
1. Drill two holes 3 15 /
16
inches apart. Then
thread a screw into
each hole, letting
the heads extend
about 5 / inch from
16
the wall.
2. Plug one end of the modular cord
into the jack on the back
TEL LINE
of the base.
3. Plug the supplied AC adapter's
barrel plug into the
10
5
/
16
15
3
/
16
5
/
16
jack.
DC IN 9V
4. Route the adapter and modular
cords through the upper and lower
grooves on the bottom of the
base.
Lower
Grooves
5. Align the keyhole slots with the
mounting screws and slide the
base downward to secure it.
Upper
Grooves