d-Color MF2001/MF2501 and d-Copia 253MF/303MF Sales Guide
2.3.2
How to change the CRU
With the new series, thanks to the CRU design, removing the drum can be done in only
6 steps as shown below, and, because it is CRU design, no tools are required.
Remove in 6 steps without having to
remove other components.
1) Open the front cover to the MFP
2) Squeeze waste toner box nozzle & eject
3) Turn lever
4) Whilst pressing lever
5) Squeeze the yellow grip and partially eject drum unit
6)When yellow handle becomes visible, completely eject
Internal and confidential publication not to be reproduced without authorisation
New colour series
No tools required!
d
to the right and lower the cover
ee
lower the cover
23