Konica Minolta CM-25cG Instruction Manual page 36

2
Use [] or [] to move the cursor to "Calibration
(Including Zero Cal.)", and then press the
[Confirmation] key.
3
Set the instrument in the calibration stage to
measure the calibration stage's zero calibration
hole.
4
Press the measurement button.
Zero calibration will be performed.
When the zero calibration is completed, a screen
prompting white calibration is displayed. Continue to step
3 on the following page to perform white calibration.
33
Place the
instrument on the
calibration stage
according to the
Calibration stage
marks.
Please set the
instrument on the zero
calibration box and
press the measurement
button.
CALIBRATION
Calibrating to zero
Calibration
Calibration
(Excluding Zero Cal.)
Calibration
(Including Zero Cal.)
Zero calibration date
2016/07/21 08:46:13
White calibration date
2016/07/21 08:46:32
Gloss calibration date
2016/07/21 08:46:54