Konica Minolta CM-25cG Instruction Manual page 38

3
Set the instrument in the calibration stage in order
to measure the calibration stage's white calibration
plate.
• Verify that the White ID shown on the screen and the
Notes
calibration stage number match.
4
Press the measurement button.
White calibration will be performed.
After white calibration is complete, a screen prompting
gloss calibration will be displayed.
5
Set the instrument in the calibration stage in order
to measure the calibration stage's gloss calibration
plate.
• Verify that the Gloss ID shown on the screen and the
Notes
calibration stage number match.
6
Press the measurement button.
Gloss calibration will be performed.
When gloss calibration is completed, the screen returns to
the one displayed before the <Calibration> screen.
35
Place the
instrument on the
calibration stage
according to the
Calibration stage
marks.
Place the
instrument on the
calibration stage
according to the
Calibration stage
marks.
Please set the
instrument on the white
calibration plate and
press the measurement
button.
White ID: xxxxxxx
CALIBRATION
Calibrating to white
Please set the
instrument on the gloss
calibration plate and
press the measurement
button.
Gloss ID: xxxxxxx
CALIBRATION
Gloss calibrating