Konica Minolta CM-25cG Instruction Manual page 19

10 Specimen measuring port
11 Measurement area switch
12 Screw holes for securing
13 Battery compartment cover
10 12 11
This is the aperture for measuring samples.
Switches the measurement area.
Used for mounting the instrument to jigs or other components.
Slide this cover to replace the battery or attach the Bluetooth module.
When the measurement surface and the bottom of the instrument are the
Memo
same height, the standard battery compartment cover should be used.
When the measurement surface is lower than the bottom of the
instrument, the supplied flat-type cover should be used.
13
1
16