Alcatel-Lucent MDR-8000 User Manual page 54

Alcatel User Interface – [System, DS3, and DS1 Provisioning -- MDR-8000 DS3]
File View Setup Options
F3 F4
Prov. Save Alarm Status
ELMC Address:
ELMC Description:
Radio Configuration
Allows user to enter the NE MCS address. The following list
provides a valid address for each station:
ALPHA NUMERIC
A 1
through through
AUDIO 1: Channel
H 16
Level
AUDIO 2: Channel
Check RSS to allow Controller to
respond when Remote Station
Level
Scanner (RSS) is polled. If this option
is not checked, Controller does not
Channel 1
RS-232
respond when RSS is polled.
Channel
TMN
MCS RSS
RDS/RAS/RCD
Check RDS/RAS/RCD to allow
controller to respond when Remote
Detail Scanner (RDS), Remote
Analog Scanner (RAS), or Remote
Thursday, March 7, 2000
Control Decoder (RCD) is polled. If
this operation is not checked,
controller does not respond when
RDS, RAS, or RCD is polled.
Un-check J310 Modem
and Output Clocks. Check
disable XMT and RCV Clocks. All clocks to
be provided by external modem.
4-44
F5 F6
Analog Monitor Performance
A default MCS-11 address
A different unique address must be entered for each radio
LOCAL DS3 PROVISIONING
J7914
to prevent concurrent responses to poll from more than one
DURANGO
Communicating***
radio with the same address. If multiple responses are
received, the response data is invalid.
Service Channel
ALPHA
A
through
Off E-Lead
F
0/0 M-Lead
Off E-Lead
0/0 M-Lead
Channel 2
3 MCS Transport
Address
J310 Modem
1:27:15 PM USI Version R1.03
to enable XMT, RCV,
J310 Modem to
Check MCS-11 J309 Termination
resistive termination at the end of an MCS-11
"daisy chain". Un-check
J310 Termination
stand-alone applications or when MDR-8000
is just a link in a daisy chain.
Figure 4 - 24 MCS-11 Provisioning
Note F7 F8
Station Alarm User Control
(A1A) is assigned automatically.
DS3 Facilities
-GND All Call Detect
Norm 2-Wire Auto Squelch
Check
J308/J309 Input clocks
-GND
syncs off XMT and RCV clocks supplied by
Norm external source (such as another radio).
Un-check
providing XMT and RCV clocks for other
Repeater D/1
radios to sync on.
RF/Rptr PPP Transport
A12A J308/J309 Input Clocks
J308/J309 Termination
Controller Version R1.03 MDR-8000 3-DS3
to enable
for
F9
Provisioning
WaySide DS1 Facilities
DTMF
Address 00
if radio
if radio is
J308/J309 Input clocks
RF/Rptr
MDR-1039
06/23/05