Alcatel-Lucent MDR-8000 User Manual page 51

DRAWING
RADIO TRANSPORT SETTING
REFERENCE
MCS
A NONE
B RF
C RPTR
D RF/RPTR
Notes:
1) Set PPP Transport to RF when the farend radio is TMN compatible, but the radio connected via the
repeater cable is not.
2) RF at both ends of the hop must be provisioned for the same PPP Transport selection.
3) RPTR at both ends must be provisioned for the same PPP Transport selection.
4) MCS-11 = Non TMN compatible
MCS-11 + PPP = TMN compatible
5) TMN compatibility is determined by the radio controller software and radio provisioning.
MDR-8000
DISABLED
RPTR PORT
MCS TRANSPORT
NONE
MDR-8000
MCS-11
RPTR PORT
MCS TRANSPORT
RPTR
Figure 4-23 MCS/TMN Transport Provisioning (Sheet 3 of 5)
PPP TRANSPORT SETTING = RF
PPP
RF
RF
RF
RF
MCS-11
PPP
RF PORT
A
PPP TRANSPORT
RF
MCS-11
PPP
RF PORT
C
PPP TRANSPORT
RF
RADIO PORT
RF RPTR
MCS-11 + PPP DISABLED
MCS-11 + PPP DISABLED
MCS-11 + PPP MCS-11
MCS-11 + PPP MCS-11
MDR-8000
DISABLED
RPTR PORT
MCS TRANSPORT
RF
MDR-8000
MCS-11
RPTR PORT
MCS TRANSPORT
RF / RPTR
MCS-11
PPP
RF PORT
B
PPP TRANSPORT
RF
MCS-11
PPP
RF PORT
D
PPP TRANSPORT
RF
MDR-1254
12/05/06
4-41