Alcatel-Lucent MDR-8000 User Manual page 25

Radio Configuration
ELMC: DS305
SYSTEM ID:
MDR-8000 DS3
RADIO TYPE:
RADIO CONFIG: Non-Standby Tx
ATPC Enabled
SYSTEM ALARM: Visual/Audible
RCV SWITCHING: Disable AGC
Option Key:
OPTIONS:
SELECT ONE ON EACH
Friday, April 8, 2005 9:16:47 AM USI Version 3.01
None
Non-Standby Tx
Hot-Standby Tx
+
Freq-Diversity Tx
SIMPLEX NS Tx
SIMPLEX HS Tx
NS = NON-STANDBY
HS = HOT-STANDBY
SD = SPACE DIVERSITY
Any combination can be selected. Select
Invalid Configuration box/message displays if combination
selected results in an invalid configuration.
Figure 4-8 DS3 Radio Configuration Provisioning
Service Channel DS3 Facilities
RADIO LINK ID: Disable
3 LINES 64 QAM
Hot-Standby Rx
A&B PA Present
RELAYS ON/NO
EYE BER Disable
Stat/Prov/WaySide
MDR-8000
None
Non-Standby Rx
Hot-Standby Rx
Space-Diversity Rx
Freq-Diversity Rx
SIMPLEX NS Rx
SIMPLEX HS/SD Rx
Note
WaySide DS1 Facilities
6GHz
TERMINAL
Relay Card Present
Station Alarm 13-16 RSL Alarm Enable
Degrade Disable
Resulting Configurations
3-DS3 Controller Version P3.03
NS Tx/NS Rx
NS Tx/HS Rx (Refer to CD)
NS Tx/SD Rx
=
HS Tx/HS Rx (See Example 1)
HS Tx/SD Rx (See Example 2)
FREQ DIV
HS Tx/NS Rx
SIMPLEX NS Tx
SIMPLEX HS Tx
SIMPLES NS Rx
SIMPLEX HS/SD Rx
and an
Prov Save
(Refer to CD)
MDR-1129
03/10/07
4-15