Table of Contents
Advertisement
Programming
Operating Instructions 667 PREMIUM - 02.0 - 01/2018
Symbol
Meaning
Thread clamp
Function active or inactive.
nd
2
Moves to the position for the 2
Edge stop reference run
If the edge stop has lost its correct position due to an
interruption, the reference run returns it to its starting
position.
5.4.2
Setting the Speed parameter (Max Speed)
It is possible to reduce the maximum speed at this point. The value
of the maximum speed can be set in the software at technician
level.
Menu item
(Max Speed)
Speed
5.4.3
Setting the Thread cutter parameter
(Thread Trim)
Set whether the thread cutter is activated or deactivated at the
end of the seam.
Menu item
(Thread Trim)
Thread cutter
edge stop distance
Setting option
0050 – 3800 [rpm]
depending on subclass
Setting option
ON = on
OFF = off
nd
edge stop distance.
57
Advertisement
Table of Contents
