Cleaning And Maintenance; Technical Info - Salus FC600 Instruction Manual

4.11 Cleaning and Maintenance

The FC600 Fan Coil requires no special maintenance. Periodically, the outer casing can be wiped clean using
a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners, as these can damage the
thermostat). There are no user serviceable parts within the unit; any servicing or repairs could only be carried
out by Salus Controls or their appointed agents.

4.12 Technical Info

Product Specification
Model:
AC power supply
Temperature Sensing specifications
Temperature Sensors
Unit of temperature measurement
Indoor temp sensor measuring range
Indoor temp sensor display range
Indoor temp display resolution
Indoor temp set point range
Indoor Temperature accuracy offset range
Frost protection point
Overheat protection
Temperature sampling duration
Multifunctional input S1-M/S2-M
Temperature sensor input Type
Temperature range
Clock display format
Program Setting
Program
Temporary & Permanent Override
Memory
Non-volatile memory
Backup power during power blackout
Dust and water proof level
Operating environment
Operating temperature
Storage temperature
Relative humidity ( non-condensed )
62 Fan Coil FC600 Instruction Manual
FC600
230Vac +10% -15% 50Hz
Air sensor ( indoor ) + External-sensor (optional)
°C
0°C –45°C
0°C –45°C
0.5°C or 0.1°C (selectable)
5°C - 40°C
From -3,0 to +3,0 in 0,5 steps
Yes
Yes
Every 15 seconds
NTC 10 kOhm B 25/50 = 3950K, R 25 = 10.000KOhm
0...50°C
12 / 24 hour format
5+2 / 7 individual days / all 7 days same
Yes
MCU flash store clock and all user settings
Uhe ideal position to locate the RT310 thermostat is about
1.5m above floor level, in a location where the thermostat
is accessible, reasonably lit and free from extremes of tem-
perature and draughts. Do not mount the thermostat on an
outside wall, above a radiator or in a location where it may be
subjected to direct sunlight.p to 17hrs
IP30
0°C - 50°C
-25°C - 60°C
<95% r.h.