Setting Schedules - Salus FC600 Instruction Manual

Fan coil thermostat
Hide thumbs Also See for FC600:
Table of Contents

Advertisement

2.8.2 Setting Schedules

Make sure that your thermostat is programmable before starting to set schedules. When you will start setting
the schedules from your thermostat, a default program will be enabled. You can easily modify the initial settings,
according to your needs. Please see below a table with the default factory schedules. You can choose from:
5+2 (Mon-Fri + Sat-Sun)
1-7 (individual programs each day)
all 7 - the same program for all 7 days of the week
Default Program time and setpoints (for Heating, Cooling and mode and Auto modes) for 2/4 pipe configuration
Program
period
1
6:00
2
8:00
3
16:00
4
18:00
5
22:00
6
-
Press Mode button for 3 seconds
Selection the heating mode schedule or cooling mode schedule is available only when the thermostat is set
to work in both modes. If the thermostat is set to work heating mode or cooling mode only then the device
will skip steps 3-4, as only one schedule needs to be created. If both modes are available - 2 schedules need
to be created (one for heating, another for cooling).
M
M
M
16
Fan Coil FC600 Instruction Manual
Cool mode set point
Day 1 to 5
Time
(or 1-7 or
individual)
24°C
28°C
24°C
28°C
24°C
-
M
3sec
Press UP arrow 1 time
Press OK button on this step if you want to set a schedule for the Cooling
Mode only. If you would like to set a schedule for the Heating Mode only,
press the Up arrow once. After you have pressed OK, the Fan Coil will go
to step 5.
Press OK button on this step if you want to set a schedule for the Heating
Mode only. If you would like to set a schedule for the Cooling Mode only,
press the Up arrow once. After you have pressed OK, the Fan Coil will go
to step 5.
Day 6 to 7
24°C
26°C
24°C
24°C
26°C
-
Note: The next steps will depend on what
configuration you have. If you have manual
heat/cool changeover you will need to select
for which mode you want to set a schedule.
M
If you have Auto heat/cool changeover, the
device will skip steps 3-4.
Note: Press any button to activate the LCD first!
Heat mode set point
Day 1 to 5
(or 1-7 or
Day 6 to 7
individual)
21°C
21°C
18°C
21°C
21°C
21°C
21°C
21°C
18°C
18°C
-
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents