Related Manuals for Salus FC600
Summary of Contents for Salus FC600
- Page 1 Fan Coil thermostat Model: FC600 Instructions Manual Fan Coil FC600 Instruction Manual...
- Page 2 *Page intentionally left blank Fan Coil FC600 Instruction Manual...
-
Page 3: Table Of Contents
4. Installer Manual ..............................36 4.1 Box Contents ................................36 4.2 Idea diagrams ................................37 4.3 Wiring options ................................40 4. 4 Terminals explanation ............................41 4.5 Wall Mounting ................................43 4.6 First Power Up ................................45 Fan Coil FC600 Instruction Manual... - Page 4 4.8 Full Parameter List ..............................51 4.9 Switching from offline to online mode ...................... 59 4.10 Reset Function ................................ 61 4.11 Cleaning and Maintenance ........................... 62 4.12 Technical Info ................................62 4.13 Warranty ..................................63 Fan Coil FC600 Instruction Manual...
-
Page 5: Introduction
1.3 Product Overview The Fan Coil thermostat (FC600) is a complex device that can help you control your room temperature and fan speed in a large number of configurations. It can be connected to a 2 or 4 pipe system and can be associated with multiple sensors (occupancy sensors, window sensors, pipe sensors), increasing by that the quality and speed of the temperature management in your home, office, hotel etc. -
Page 6: Operation Manual (Offline Mode)
2.1 Principles of Operation The FC600 thermostat can control 2 vales (in 2 pipes the V1 input controls heating and cooling, in 4 pipes V1 controls heating and V2 controls cooling). FC600 can also control the FAN speed in 3 levels: low, medium or high, in order to maintain the room temperature. -
Page 7: Lcd Icon Description
8. Temperature unit 21. Program number 9. Heating Mode ON 22. S1/COM Sensor indicators 10. Cooling Mode ON 23. S2/COM Sensor indicators 11. STANDBY mode 24. Room/set point temperature 12. Occupancy/vacancy sensor 25. Set point temperature indicator Fan Coil FC600 Instruction Manual... - Page 8 25. Set point temperature indicator Man in door when presence detected , empty Icon appears when a new setpoint temperature is door when not. being set. 13. Lock function This icon indicates the keys of the device are locked. Fan Coil FC600 Instruction Manual...
-
Page 9: Power Up
Installer Section in chapter 4) it will go into STANDBY Mode. To start using your FC600 and adjust room temperature, create schedules and operate the fan you will need to wake it up. Simply press the button for 3 seconds. -
Page 10: Fan Control
Note: In program mode, the default fan mode is automatic. The fan mode can be changed to Manual by pressing the Fan Button. The fan will not return to the auto mode until the next program time. Fan Coil FC600 Instruction Manual... -
Page 11: Operation Mode Selection
Note: If you have the occupancy sensor, then the Eco Mode will be activated automatically when the set up is complete. This is the default setting. You can choose from either ECO or STANDBY modes. Fan Coil FC600 Instruction Manual... - Page 12 Eco Mode with auto heat/cool changeover. The temperature will be set using Eco temperature setpoint. When in Eco Mode, the thermostat will use Eco set point to control room temperature. You cannot change the temperature in Eco mode. Fan Coil FC600 Instruction Manual...
- Page 13 The Leaf icon indicates that the thermostat is in Eco Mode. The snowflake icon indicates that the thermostat is in Heating Mode. When in Eco Mode, the thermostat will use Eco setpoint to control room temperature. You cannot change the temperature in Eco Mode. Fan Coil FC600 Instruction Manual...
-
Page 14: Other Mode Button Functions
(time and offset are available always). As default, the thermostat is configured as digital (non-programmable) thermostat! If you would like to change the thermostat from digital to programmable, you need to change d00 parameter from 0 to 1 (please see page 51). Fan Coil FC600 Instruction Manual... -
Page 15: Setting Date And Time
05 01 09:00 05 01 After date and time are set, thermostat Select date. Press OK Press OK. will go to home screen. Fan Coil FC600 Instruction Manual... -
Page 16: Setting Schedules
Press OK button on this step if you want to set a schedule for the Heating Mode only. If you would like to set a schedule for the Cooling Mode only, press the Up arrow once. After you have pressed OK, the Fan Coil will go to step 5. Fan Coil FC600 Instruction Manual... - Page 17 If you are programming every day individually, you will have to set the programs from 1- 6 for Monday, then Tuesday, Wed, Thu, Fri, Sat and Sun. If you are programming all week the same, you will have to set all the 6 programs just once. Fan Coil FC600 Instruction Manual...
- Page 18 • The starting time of the next program cannot be equal or earlier than the previous one. For example in the first program starts at 8:00, the next has to start at least 8:10 etc. Fan Coil FC600 Instruction Manual...
-
Page 19: Offset Function
Frost Protection is a function that prevents pipes from freezing. Auto Frost Protection is always on and it is set to 5⁰C. In Frost Protection all outputs are Off. Frost protection is active during the Standby mode as well. 3sec Long Press to enter STANDBY/ Thermostat in STANDBY/Frost Frost Protection Mode. Protection Mode. Fan Coil FC600 Instruction Manual... -
Page 20: Key Lock Function
External sensor open or external sensor is not connected External sensor short circuit When the external sensor is reconnected or fixed, thermostat will return to Normal mode and display the current room temperature. When Err XX appears, the thermostat will be closed. Fan Coil FC600 Instruction Manual... -
Page 21: Standby Mode
You can always switch back off STANDBY Mode by long pressing the OK button. All relay outputs immediately change to OFF, regardless of the previous operating mode (heat, cool, auto heat/cool). All your preset settings will be stored. When FC600 works in Standby mode, the Frost Protection is running. -
Page 22: Operation Manual (Online Mode)
3.1 Quick Overview This section will show how to use your Fan Coil with the Universal Gateway and the Salus Smart Home App. In order to do that, you will be needing a Salus Universal Gateway UG600/UGE600, the Salus Smart Home App and Internet connection. -
Page 23: App Screen Icon Description
If Heat/Cool mode selected, tap for Heating/Cooling Edit thermostat name On/Off/Schedule/Eco/Hold Tap for submenu Manually adjust temperature Set Temperature Fan Speed/Off/On Tap for submenu Current Temperature Find your device Window sensor button Settings Button Pin/Unpin Lock/Unlock thermostat thermostat to dashboard Fan Coil FC600 Instruction Manual... -
Page 24: Device Name Change
Fan Coil FC600 Instruction Manual... -
Page 25: Heat/Cool Selection
When thermostat is in COOLING mode, and is calling blue for COOL Thermostat tile on Thermostat tile on the dashboard when the dashboard when thermostat is in thermostat is in Cooling Mode and Heating Mode and calls for cooling. calls for heating. Fan Coil FC600 Instruction Manual... -
Page 26: Work Status
When the thermostat runs is Permanent Hold, the hand icon will be displayed on the App screen . Tap hand icon Tap to enter sub-menu The thermostat is in permanent hold Fan Coil FC600 Instruction Manual... -
Page 27: Eco Mode
Note: If you have an occupancy sensor ( then the Eco Mode will be activated automatically when the set up is complete. This is the default d34 setting. You can choose from either Eco or STANDBY mode. Fan Coil FC600 Instruction Manual... -
Page 28: Standby Mode
Note: After the thermostat exits Standby Mode, all the settings will be restored. Tap the work status icon. Select Off. The thermostat is running in STANDBY Mode. Tap On/Off icon. Select On. Thermostat in previous mode. Fan Coil FC600 Instruction Manual... -
Page 29: Setting A Schedule For The Thermostat
To add interval, tap Add. heating. cooling. Note: The time should be in hh:mm format and the temperature value should be a number between 5 and 40. Decimal digits must end in 0 or 5. Fan Coil FC600 Instruction Manual... - Page 30 Your schedule has been Make your changes using can edit them by pressing the successfully updated. the steps 4-8 and tap pencil sign. update. You can delete undesirable intervals by: Interval deleted. Tap Sign Delete button will appear. Fan Coil FC600 Instruction Manual...
-
Page 31: Fan Control
To unlock, tap it again. When the keys are locked, the user can't press any keys on the device. Thermostat locked. Tap to Thermostat unlocked. Tap lock icon. unlock. You can also change the key lock settings in parameter settings, by changing the d37 value in Installer Mode. Please check page 51. Fan Coil FC600 Instruction Manual... -
Page 32: Occupancy Sensor
Please see below. To add a window sensor to you system, please refer to OS600 manual on salus-manuals.com Tap window icon. Tap window icon. -
Page 33: Identification Function
Thermostat is pinned to the Thermostat is pinned to the Thermostat unpinned. dashboard. dashboard. Tap pin to unpin. Tile is no longer visible. To Tap Equipment. Tap thermostat. Tap to pin back. access the thermostat go to Menu. Fan Coil FC600 Instruction Manual... -
Page 34: Service Settings
You will have to enter a special password in order to access the settings menu. Please read more in the Installer Manual section about more detail on how to access the settings with a full description of the parameters. See page 50. Fan Coil FC600 Instruction Manual... -
Page 35: Using/Adding Onetouch
Press the button to get Go to home screen by OneTouch tile appears on your home Your thermostat is set to the OneTouch running. tapping screen and thermostat went blue 21 ⁰C meaning it is cooling down. Fan Coil FC600 Instruction Manual... -
Page 36: Installer Manual
Fan Coil FC600 Instruction Manual... -
Page 37: Idea Diagrams
4.2 Idea diagrams Below you can find some possible usage diagrams for the Fan Coil thermostat, depending on the on your system and components. • 2 pipe, heating only • 2 pipe, cooling only Fan Coil FC600 Instruction Manual... - Page 38 • 2 pipe, heating OR cooling • 2 pipe, heating AND cooling Fan Coil FC600 Instruction Manual...
- Page 39 ECO or Standby mode) Pipe temperature sensor (allows the fan to be working or not) Air temperature sensor or external room temp. sensor (FC600 will display temperature from the sensor connected to T2. Internal temperature sensor will be ignored) Motorized valve / actuator...
-
Page 40: Wiring Options
- Air temperature sensor or external room temp. sensor Heat/Cool changeover (or pipe sensor - only in 2-pipe system)* (active T2 sensor disable temperature measurement in thermostat) Occupancy sensor or external sensor - Zone valve Common Terminal Fan Coil FC600 Instruction Manual... -
Page 41: Terminals Explanation
Occupancy sensor is connected to the S2/COM The temperature read by the sensor will be terminal (e.g.: hotel card). displayed on the Fan coil LCD. The internal sensor in the Fan coil will not be used. Default setting: noFn Fan Coil FC600 Instruction Manual... - Page 42 On/Off the fan, if selected. An external pipe sensor is connected to the S1/COM terminal, that tells the fan to run or not. The type of sensor connected to the S1/ Sens COM terminal need to be NTC 10kOhm. Fan Coil FC600 Instruction Manual...
-
Page 43: Wall Mounting
Temperature thermostat to gain data from. Can be operable with any d2 value. The sensor should be Sensor NTC 10kOhm. 4.5 Wall Mounting Fan Coil FC600 Instruction Manual... - Page 44 60mm Align the front housing at the top edge. Fit the front housing to the rear housing Ensure the pin connections are aligned Lightly press until you hear a positive click. Fan Coil FC600 Instruction Manual...
-
Page 45: First Power Up
Offline Mode. You can always switch to Online mode from Offline. Please see page 50 for details. For first time installation without Internet, please follow the steps below: When FC600 goes On, the LCD will Short press OK button. -
Page 46: Online Mode (With Internet Connection)
To begin the pairing process the Gateway should be plugged into the power source and connected to the Internet. Also, make sure that the UG is added to your Salus Smart Home App. For the installation of the Universal Gateway, please refer to the UG600/UGE600 manual on salus-manuals.com Make sure that your Universal Gateway is added to the App. - Page 47 Fan Coil to your - 2 or 4 pipe configuration more info on one Touch, dashboard. Tap Next and then tap Next to go to please check p 35. This will the next step. NOT influence your settings. Fan Coil FC600 Instruction Manual...
- Page 48 S2 sensor. format. Tap Complete Setup Tap Finish to go to the next Please see page 41 on step. The Fan Coil tile will external sensors. Tap Next appear on your screen. Fan Coil FC600 Instruction Manual...
- Page 49 App, or on the device itself. Please see next page for a list of icons displayed on the screen in your App. For a full list of icons on your Fan Coil screen please see page 8. Fan Coil FC600 Instruction Manual...
-
Page 50: In Offline Mode (With No Internet Connection)
Internet. To change the installer parameters when the device is connected to the App, please see the page below. 4.7.2 Switching from non-programmable to programmable thermostat After first power up, FC600 is non programmable by default. If you would like to switch it to programmable thermostat in local mode, please follow below steps: 3sec... -
Page 51: In Online Mode (Via App)
The d00 will flash. Using the up/ The d00 value will flash. Using The d00 will flash. Press OK down keys change parameter name. the up/down keys enter value. to enter parameter. Fan Coil FC600 Instruction Manual... - Page 52 Note: During the installer mode, if no any button pressed, then FC600 should save the changes and go to main menu in 15minutes. Parameter Type of setting Description Default number Values Type of thermostat 0 = Non-programmable - you cannot set schedules to your thermostat.
- Page 53 0 = TPI 1 = Span control d 16 Set the control type 0 = Slow change environment in modulation. This 1 = Fast change environment parameter is available only if we select TPI algorithm, not SPAN Fan Coil FC600 Instruction Manual...
- Page 54 The 'clean fan filter reminder' function counts the fan operating hours. Is OFF or from 0.1 to 9.9 (9.9 means 9900hrs = 9.9*100) Protection heating OFF or from 5⁰C to 40⁰C (d29 value can not higher than set point d30) Fan Coil FC600 Instruction Manual...
- Page 55 They depend on your initial setup and on the configuration of your system and can be changed only when you will reinstall/make changes to you fancoil or system.Some parameter will be visible/invisible in depend of the MAIN parameters setting (d01,d02,d03,d04, programmable, non-programmable). Fan Coil FC600 Instruction Manual...
- Page 56 If d38 is set to FAN controlled by TPI/SPAN – then FAN will by running on manually set speed (low/medium/ high) but ONLY when pipe sensor will allow to run the fan. Please see graphic on next page. Fan Coil FC600 Instruction Manual...
- Page 57 Tstat work in COOLING mode FAN – controlled by TPI or SPAN! VALVE – controlled by TPI or SPAN Tstat work still in cooling mode FAN is OFF VALVE – controlled by TPI or SPAN Fan Coil FC600 Instruction Manual...
- Page 58 STANDBY mode until a sensor will tell it to (for example window sensor - window closed). If the user will set another mode (eg. Permanent hold), the Fan Coil will exit STANDBY mode and follow the selected mode. Fan Coil FC600 Instruction Manual...
-
Page 59: Switching From Offline To Online Mode
To begin the pairing process the gateway should be plugged into the power source and connected to the Internet. Also, make sure that the UG is added to your Salus Smart Home App. For the installation of the Universal Gateway, please refer to the UG600/UGE600 manual on salus-manuals.com Make sure that your Universal Gateway is added to the App. - Page 60 FC App screen. connect equipment. tap Next. Scroll down and tap complete Now, tap Finish to finish the Now, set your Fan Coil The thermostat tile appears set up. setup. accordingly to your system on the dashboard. Fan Coil FC600 Instruction Manual...
-
Page 61: Reset Function
You will not be able to operate any changes to it. An alert screen sign will appear on your screen. If you tap it, it will tell that th Fan Coil left the system. Fan Coil FC600 Instruction Manual... -
Page 62: Cleaning And Maintenance
4.11 Cleaning and Maintenance The FC600 Fan Coil requires no special maintenance. Periodically, the outer casing can be wiped clean using a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners, as these can damage the thermostat). There are no user serviceable parts within the unit; any servicing or repairs could only be carried out by Salus Controls or their appointed agents. -
Page 63: Warranty
4.13 Warranty SALUS Controls warrants that this product will be free from any defect in materials or workmanship, and shall perform in accordance with its specification, for a period of two years from the date of installation. SALUS Controls sole liability for breach of this warranty will be (at its option) to repair or replace the defective product. - Page 64 E: tech@salus-tech.com www.salus-controls.com SALUS Controls is a member of the Computime Group Maintaining a policy of continuous product development, SALUS Controls plc reserves the right to change specification, design and materials of products listed in this brochure without prior notice.