Heat/Cool Selection - Salus FC600 Instruction Manual

3.4 Heat/Cool selection

The Fan Coil gives you possibility to select between heating or cooling modes via App if the thermostat is set
on manual heat/cool change over. To do that, follow these simple steps:
Click on thermostat tile to
enter your thermostat.
Note: While in Manual Mode you want to set a temperature that is higher than the current room temperature,
you need to choose Heat Mode before changing the Setpoint to the new value. If you want to set a
temperature that is lower than the current temperature in the room, you need to choose Cool Mode before
changing the Set point to the new value. Otherwise the thermostat will not respond.
App icons for Heat and Cool
Icon
gray
orange
gray
blue
25 Fan Coil FC600 Instruction Manual
Click on thermostat name to
enter main screen.
Thermostat tile on
the dashboard when
thermostat is in
Heating Mode and
calls for heating.
Tap to select mode.
Explanation
When thermostat is in HEATING mode, but is not
calling for HEAT
When thermostat is in HEATING mode, and is calling
for HEAT
When thermostat is in COOLING mode, but is not
calling for COOL
When thermostat is in COOLING mode, and is calling
for COOL
Select Cool/Heat mode.
Thermostat tile on
the dashboard when
thermostat is in
Cooling Mode and
calls for cooling.