First Power Up; Offline Mode (With No Internet Connection) - Salus FC600 Instruction Manual

4.6 First Power Up

4.6.1 Offline Mode (with no Internet connection)

You can install your thermostat in Local Mode, without using the Universal Gateway UG600 and the App. It will
run in Offline Mode. You can always switch to Online mode from Offline. Please see page 50 for details. For first
time installation without Internet, please follow the steps below:
M
On first activation, FC600
will display software
version.
M
Press OK.
M
Heating only...
Note: Steps from 8-10 (choosing heating/cooling or both) is available only for the manual heat/cool changeover.
If you choose Auto or HCCO at step 6, the thermostat will skip these settings and will enter STANDBY Mode.
45 Fan Coil FC600 Instruction Manual
M
When FC600 goes On, the LCD will
show "UG YES" flashing. Please select
"NO" using the UP or DOWN arrow, as
we are connecting the FC600 without
Internet connection.
M
Select what is connected to S1.
By default is No function. Please
see page 40 for details.
M
..or heating and cooling.
Confirm by OK.
M
Short press OK button.
M
Select an output for S2. the
default is No function. Please
see page 41 for details.
M
3sec
When the main settings are done
- FC 600 will go to Standby mode.
Press OK for 3 sec to turn ON the
FC600.
M
Choose your system type: 2 pipe
or 4 pipe.
M
Please select if you want to
use your 2 pipe Fan Coil for
Cooling only...
M
M
Thermostat is On.