If your thermostat is set to Auto Heat/Cool selection, these are the 3 possible combinations you can have by
short pressing the Mode Button:
1.
The A Icon indicated that the thermostat is running in auto heat/cool changeover mode.
The hand icon shows Permanent Override Mode (manual). You can set a temperature
depending on the auto heat/cool changeover setpoint temperature.
M
M
2.
Schedule Auto Mode. The temperature will be set depending on your created schedules
and the thermostat will change between the Heating/Cooling modes automatically.
M
M
3.
M
M
M
2.8 Other Mode Button Functions
Note: Setting the date and creating schedules is available only when the thermostat is
programmable (time and offset are available always). As default, the thermostat is configured as
digital (non-programmable) thermostat! If you would like to change the thermostat from digital
to programmable, you need to change d00 parameter from 0 to 1 (please see page 51).
14
Fan Coil FC600 Instruction Manual
Eco Mode with auto heat/cool changeover. The temperature will be set using Eco
temperature setpoint. You cannot change the setpoint in Eco Mode.
By long pressing the Mode Button
•
Set Time and Date
•
Create Schedules
•
Access Offset Function
M
3sec
M
on your Fan Coil, you can