Salus FC600 Instruction Manual page 49

Note : If you clicked on External Sensor, but have none connected to the thermostat, your Fan Coil will
not display any temperature. After you clicked Finish and completed your setup, you cannot change
the initial settings through the App. You will need to remove and re-install your Fan Coil, choosing the
correct options. Please see page 62 on how to remove your thermostat from the App and reset it. After
you click Finish, your thermostat will enter STANDBY mode.
Click on thermostat tile to
enter your thermostat.
After you see the Fan coil tile on your dashboard, please allow a few minutes for all the settings to properly
install. After you turned your thermostat On using the App, the screen on both your thermostat and App will
change, showing your initial settings. At this point you can start adding schedules and using your thermostat
from the App, or on the device itself. Please see next page for a list of icons displayed on the screen in your App.
For a full list of icons on your Fan Coil screen please see page 8.
49 Fan Coil FC600 Instruction Manual
Click on thermostat name to
enter main screen.
Click on On/Off icon to turn on
your thermostat.
A sub-menu will appear on
screen, tap On to turn on your
thermostat