Remote Control - Q-See QSD32824-250 User Manual

[Input: AC 100-240V, 50/60Hz, 1.5A / Output: DC +12V == 3A]
● PS/2 MOUSE PORT
Use this port for PS/2 mouse connection. If you have USB port mouse, use USB - PS/2
adapter to connect with this port.
● Fan

3.3 Remote Control

The buttons on the DVR remote control unit operates the system's basic functions, such as
recording, playback, fast-forward, reverse, etc. For more details about the DVR menu, refer
to "6. SETUP".
⑴ CH1↑
Use this button for full screen display for channel 1 on the monitor or move
the cursor up.
⑵ CH2↓
Use this button for full screen display for channel 2 on the monitor or move
the cursor down.
⑶ CH3←
Use this button for full screen display for channel 3 on the monitor or move
the cursor left.
Also user can press this button to reduce value when adjusting
parameters.
⑷ CH4→
Use this button for full screen display for channel 4 on the monitor or move the cursor to the
right.
Also user can press this button to increase value when adjusting parameters.
⑸ Quad
Use this button for full screen quad display on the monitor screen. If you push this button,
DVR will display all 4 channels (cameras) at the same time in quad screen.
⑹ ● (REC)
Press "REC" button to start manual recording. Then you will see this mark '
selected channel of the screen, which means that the channel is now recording.
To stop manual recording, press "REC" again during recording mode.
⑺ ■ (STOP)
Operation Manual-4CH Duplex DVR
4
●' on the