Adjusting The Needle Position Up/Down; Adjusting The Needle Position Left/Right; Needle Stop Up/Down (Permanent) - Bernina 590 Instructions Manual

Sewing preparation
> Touch the icon «Needle type/Needle size».
> Select the needle type (1) of the inserted needle.
> Select the needle size (2) of the inserted needle.
1
2

Adjusting the needle position up/down

> Push the button «Needle up/down» to lower the needle.
> Push the button «Needle up/down» again to raise the needle.

Adjusting the needle position left/right

There is a total of 11 needle positions. The needle position is indicated by the needle position number in the
display.
> Push the button «Needle left» (1) to move the needle to the left.
> Push the button «Needle right» (2) to move the needle to the right.
2
1

Needle stop up/down (permanent)

> Touch the icon «Needle stop up/down (permanent)» to fix the needle position permanently.
– The machine stops with needle position down as soon as the foot control is released or the button
«Start/Stop» has been pressed.
45