Updating The Machine Firmware; Recovering Saved Data - Bernina 590 Instructions Manual

Setup Program

Updating the machine Firmware

NOTICE
BERNINA USB stick (optional accessory) has been removed too early
Firmware has not been updated and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the update has been completed
The latest firmware of the machine and a detailed step-by-step instruction for updating processes can be
downloaded at www.bernina.com. In general, personal data and settings are automatically transferred
during a firmware update. For reasons of safety, it is also recommended to save data and settings on a
BERNINA USB stick (optional accessory) before the firmware update is started. If personal data and settings
should get lost during a firmware update, they can be transferred to the machine again afterwards.
> Insert the BERNINA USB Stick (optional accessory), FAT32 formatted, providing the latest software into
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Update the machine».
UPDATE
> Touch the icon «Save data on USB Stick».
> Touch the icon «Update» to start the update of the firmware.
Update
Update

Recovering saved data

NOTICE
The BERNINA USB stick (optional accessory) has been removed too early.
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
If personal data and settings after a software update are not available anymore, they can be transfered to
the machine again afterwards.
> Insert the BERNINA USB stick (Optional accessory) providing the saved data and settings into the USB port
72
successfully.
the port.
– The icon is checkmarked in green.
successfully.
of the machine.