Programming The Heirloom Buttonhole; Sewing The Manual 7-Step Buttonhole - Bernina 590 Instructions Manual

9.11 Programming the Heirloom buttonhole

Prerequisite:
• The Buttonhole foot with slide No. 3A is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 63.
> Sew the desired buttonhole length.
> Push the button «Quick reverse» to program the length.
– The machine finishes the buttonhole automatically. All subsequent buttonholes are sewn at the same
length.

9.12 Sewing the manual 7-step buttonhole

The buttonhole length is determined manually when being sewn. Bartack, keyhole and securing stitches are
pre-programmed. The individual steps can be selected by scrolling via the arrow icons or by touching the
button «Quick reverse».
Prerequisite:
• The Buttonhole foot No. 3C (optional accessory) is attached.
> Touch the icon «Buttonholes».
> Select the Buttonhole No. 51.
> Touch the icon «i»-Dialog.
> Touch the icon «Adjust the length manually».
man
– Step 1 in the display is activated for the buttonhole start.
> Sew the desired buttonhole length.
– Step 2 is activated.
> Stop the machine at desired length of the bead or at the end of the length marking.
> Touch the icon «Scroll down» so that step 3 appears.
– The machine sews straight stitches in reverse.
> Stop at the height of the first stitch at the start of the buttonhole.
> Touch the icon «Scroll down» so that step 4 appears.
– The machine sews the upper bartack and stops automatically.
> Touch the icon «Scroll down» so that step 5 appears.
– The machine sews the second bead.
> Stop the machine at the height of the first bead.
> Touch the icon «Scroll down» so that step 6 appears
– The machine sews the bottom bartack and stops automatically.
Buttonholes
127