Embroidering preparation
13.3 Preparing the machine
Lowering the feed dog
> Push the button «Feed dog up/down» to lower the feed dog.
> Attaching the stitch plate CutWork/Straight.
> Insert the needle.
> Attaching the embroidery foot.
Selecting an embroidery motif
All embroidery motifs can either be embroidered as-is or edited using the various functions offered by the
embroidery machine. All embroidery motifs can be found in the attachment of this instruction manual. In
addition to that, embroidery motifs can be loaded from the personal memory or from the BERNINA USB stick
(optional accessory).
> Touch the icon «Home».
> Touch the icon «Embroidery mode».
> Select an alphabet, embroidery motif or a personal embroidery motif from a file.
13.4 Embroidery foot
Attaching the embroidery foot
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
> Push the clamping lever up (1).
145