Deleting Motifs On The Bernina Usb Stick; Calibrating The Buttonhole Foot No. 3A - Bernina 590 Instructions Manual

Hide thumbs Also See for 590:
Table of Contents

Advertisement

Deleting motifs on the BERNINA USB Stick

When motifs which won't be needed anymore are saved on the BERNINA USB Stick (Optional accessory), the
stick can be connected to the machine and the data can be deleted.
> Insert the BERNINA USB Stick (Optional accessory) into the den USB port of the machine.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Default settings».
> Touch the icon «Delete data from USB Stick».
> Touch the icon «Confirm» to delete all data on the BERNINA USB Stick (optional accessory).

Calibrating the Buttonhole foot No. 3A

The Buttonhole foot No. 3A is calibrated to this machine and they should only be used both together.
Prerequisite:
The Buttonhole foot No. 3A is attached.
The needle is not threaded.
> Touch the icon «Home».
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Calibrate the Buttonhole foot with slide No.3A».
> Touch the button «Start/Stop» to start the calibration.
Setup Program
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

570 qe540

Table of Contents