Embroidering Preparation; Attaching The Module; Removing The Embroidery Module - Bernina 590 Instructions Manual

Embroidering preparation

13 Embroidering preparation

13.1 Attaching the Module

NOTICE
Transporting the embroidery module
Damage to the embroidery module connection and machine.
> Remove the embroidery module before transporting the machine.
Prerequisite:
•
> Make sure that the module and the machine are placed on a stable, even surface.
> Make sure that there is enough space around to allow the unimpeded movement of the embroidery arm.
> Carefully push the embroidery module from left to right into the embroidery module connection of the

13.2 Removing the embroidery module

> Push the release lever (1) at the carrying handle of the embroidery module, keep it pressed and at the
144
The slide-on table must not be attached.
machine (1) and the guide rail (2).
same time, move the embroidery module carefully to the left.
1
1
2