Correcting The Balance; Programming Pattern Repeat; Programming Long Stitch - Bernina 590 Instructions Manual

Creative sewing

Correcting the balance

The machine is tested and set optimally before it leaves the BERNINA factory. Different fabrics, threads and
stabilizers can affect the programmed stitch patterns so that they cannot be sewn out correctly. The
electronic balance can correct these deviation and the stitch pattern can be adjusted optimally to the selected
fabric.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Balance».
> Turn the «Lower Multifunction knob» to correct the vertical direction of the stitch pattern.

Programming pattern repeat

Stitch patterns can be repeated up to 99 times.
> Select a stitch pattern or alphabet.
> Touch the icon «i»-Dialog.
> Touch the icon «Pattern repeat».
x
– A new display appears.
> Enter the desired number of stitch patterns.
> Touch the icon «Confirm».

Programming long stitch

The maximum length for long stitches is 12 mm and the machine sews every second stitch.
> Select a stitch pattern.
> Touch the icon «i»-Dialog.
> Touch the icon «Long stitch».
> Touch the yellow-framed icon to reset the alteration to default setting.
81