Outline Of Rs-232C And Ip Commands - Pioneer PRO-141FD Service Manual

1

5.7 OUTLINE OF RS-232C AND IP COMMANDS

A
[1] PREPARED TOOLS
To use RS-232C commands, it is necessary to prepare the following items:
• PC
• Application for control
• 232C cable (straight)
Notes:
The setting of the Com port cannot be communicated if it doesn't do correctly.
(Please follow a set explanation of PC in the Com port)
To use IP control commands, it is necessary to prepare the following items:
B
• PC
• Application for control: Internet explorer
• LAN cable (straight)
Notes:
• A PC with Windows 98 series/Me or Windows operating systems other than those for Japan installed
may not operate properly.
• Perform the IP control settings after selecting HOME MENU, Control Setup, then IP Control Setting, in that order.
• The PC must be set for network connection.
[2] COMMAND PROTOCOL
C
Communication Protocol
[Communication protocol between external control equipment and Main microcomputer]
Item
Communication method
Start bit
Data bit
Parity
Stop bit
Baud rate
D
E
F
88
1
2
Setting
Asynchronous transfer (asynchronous communication)
1 bit
8 bit (LSB First)
None
1 bit
Select 1200/2400/4800/9600/19200/38400
2
3
According to setting of HOME MENU - Control Setup - Baud Rate
PRO-141FD
3
4
Remarks
4