Pioneer PRO-141FD Service Manual page 159

5
[2-2] PANEL WORKS
• Data on operations, such as the accumulated pulse-meter counts, hour-meter count, power-on count, and temperature
detected by the sensor, are displayed. No other layers are nested below this layer, and there are no adjustment items.
1 5 10 15
1 F A C T O
I N F O R M A T I O N
5 P A N E L W O R K S
P M – B 1 0 0 0 0 0 7 1 5
P M – B 2 0 0 0 0 0 6 0 7
P M – B 3 0 0 0 0 0 8 5 2
10 P M – B 4 0 0 0 0 0 6 6 8
P M – B 5 0 0 0 0 0 7 3 3
H R – M T R 0 0 0 0 2 5 H
P – C O U N T 0 0 0 0 0 0 9 5
15 T E M P 1 + 2 7 . 4
C L S – R G B 2 0 0 0 / 0 3 2 5 /
20
24
Contents of the Display item
• PM-B1 to B5: The accumulated pulse-meter counts for the 5 blocks on the screen
are indicated. (the lowest-order digit represents millions of pulses.)
• HR-MTR: The hour-meter value (accumulated power-on hours) is indicated.
• P-COUNT: The accumulated power-on count is indicated.
• TEMP1: The current panel temperature and the historical maximum temperature
recorded in memory are indicated. The range of temperature indication is from
-50.0 to +99.9. (The temperature unit is " °C (Centigrade) ".)
• CLS-RGB: Data obtained from the color sensor are displayed in the order R, G,
and B, with the status indication at the end.
5
6
20 25 30
R Y M E N U
I N 5 – 3 0 6 0 2 – R G B – W H M 9
M
M
M
M
M
2 0 M
T I M E S
/ + 7 0 . 8
1 2 2 3 – O K
PRO-141FD
6
7
34
g Key operation
<DOWN> : Shifting to POWER DOWN
<UP> : Shifting to PANEL INFORMATION
<L/R> : Updating displayed information
Temperature unit is " °C (Centigrade) ".
CLS Status
Function OFF
Color sensor module
non connection
Data abnormality
Data normal
Note:
Turning ON the functions of the color sensor
can be performed in the ETC(+) layer.
7
8
A
B
C
OSD
Indication
-OFF
-NC
-INV
-OK
D
E
F
159
8