Pioneer PRO-141FD Service Manual page 80

1
A
" Confirmation of the number of connected devices
Check that the number of connected devices does not
exceed the maximum number for guaranteed operations.
Equipment
DVD recorder
BD player
AV System
B
" Confirmation of settings
Check that the settings for the KURO LINK function are
properly made. (For details, refer to "Setting the KURO
LINK" in the Operating instructions.)
Check that the following conditions are met:
• "Input Setting" on the KURO LINK Setting menu must
be set to the same input as that to which the equipment
that supports the KURO LINK function is connected.
• When Power Off Control, Power-On Ready, or Hold
Sound Status are to be used, their settings must be On.
C
" Confirmation of operations
Check that the KURO LINK function works properly.
(1) Connect a device that supports the KURO LINK function.
(2) Perform the procedures that are required after changing
connections, which are described in "Making the KURO
LINK connections" in the Operating instructions.
1 Turn on the plasma television and all the connected
devices.
2 Confirm that the setting in "Input Setting" for "KURO
D
LINK Setting" is properly entered according to the
connected devices. Also confirm the KURO LINK
related settings in the connected devices.
3 Switch to the HDMI input terminals to which the
devices are connected to check if audio and video
images are properly output and displayed.
4 Try turning off the plasma television, then turn the
power back on to the plasma television.
(3) Perform "Power On Test" or "Power Off Test" on the
KURO LINK Setting menu. (For details, refer to "Power
On/Off Test" in the Operating instructions.)
E
If the following occurs even if the operation check is
performed properly, a failure, such as breakage of the HDMI
cable, problems on the side of the connected device, and
problems with the MAIN Assy, may be suspected:
• "Power On Test" or "Power Off Test" cannot be selected
(the items are grayed)
• The connected device cannot be turned on/off.
In some cases, an operation check using another HDMI
input connector may be required in order to narrow down the
cause.
F
80
1
2
Maximun
Number
2
2
1
PRO-141FD
2
3
3
4
4