How To Update Firmware - Pioneer PRO-141FD Service Manual

5

8.6 HOW TO UPDATE FIRMWARE

Unzip "CpuRewtier8G_xxxxxx.zip".
(1) PDP is connected with PC with RS-232C straight cable.
(2) PDP is put into the state of the standby.
(3) Execute CpuRewriter.
(4) Select the [CPU definition] to write in from a list.
(4)
Fig. 1 Selection of CPU definition
(5) CPU definition that writes it is selected.
The following "Set dialog" is displayed when selecting it.
(6) CPU definition that writes it is selected.
A default setup is as in the following figures.
It unites with the environment of PC to be used about a
"COM port."
If "Data Log" is checked, although detailed Log will be
outputted during rewriting, rewriting time becomes late a
little.
If "Forced Negotiation" is checked, the version down of
writing software can be performed.
The Forced Negotiation setting for rewriting of programs
on the MAIN and IP microcomputers is not available.
In the case of a standby state, "POF" should not check.
A push on "Return to default" inputs a default value into
"a rewriting setup."
(6)
Fig. 2 Selection of CPU(MAIN)
5
6
PRO-141FD
6
7
Fig. 3 Selection of CPU(ARIA)
Fig. 4 Selection of CPU (MODULE)
Fig. 5 Selection of CPU (MERIVA/ZEUS)
Fig. 6 Selection of CPU (IP)
7
8
A
B
C
D
E
F
207
8