Yanmar 3TNV82A Service Manual page 78

GENERAL SERVICE INFORMATION
Engine Model
Version
Engine Weight (Dry)
with Flywheel Housing*
PTO Position
Firing Order
Fuel Injection Timing
Direction of Rotation
Cooling System
Lubricating System
Normal Oil Pressure at
the Rated Engine Speed
Normal Oil Pressure at
the Low Idle Speed
Starting System
Dimensions (L × W × H)*
Engine Oil Pan
Capacity**
Engine Coolant Capacity
Standard Cooling Fan
* Engine specifications without radiator.
** Engine oil capacity for a "deep standard" oil pan. Refer to the operation manual provided by the driven machine
manufacturer for the actual engine oil capacity of your machine.
*** May vary depending on the application.
4-42
CL
1-3-4-2-1 (No. 1 Cylinder on the Flywheel End)
See Checking and Adjusting Fuel Injection Timing on page 7-26
Counterclockwise Viewed From the Flywheel End
45 - 71 psi
(0.31 - 0.49 MPa;
2
3.16 - 5.00 kgf/cm )
8.8 psi (0.06 MPa; 0.6 kgf/cm
Electric Starting - Starter Motor: DC12V, 4.0 hp (3.0 kW)
Recommended Battery Capacity: 12V, 88 Amp-Hour (5h rating)
31.81 x 24.69 x 31.61 in.
(808 x 627 x 803 mm)
14.8 / 5.3 qt (14.0 / 5.0 L)
(Dipstick Upper Limit / Lower Limit)
19.68 in. (500 mm) O.D.
7 Blades Pusher Type
Principal Engine Specifications
4TNV106
727.7 lb (330 kg)
Flywheel End
Liquid-Cooled with Radiator
Forced Lubrication with Trochoid Pump
With balancer 49 - 64 psi
(0.34 - 0.44 MPa; 3.47 - 4.49 kgf/cm
Without balancer 57 - 71 psi
(0.39 - 0.49 MPa; 3.98 - 5.00 kgf/cm
Alternator: DC12V, 55A***
30.63 x 24.69 x 31.61 in.
14.8 / 6.9 qt (14.0 / 6.5 L)
(Dipstick Upper Limit / Lower Limit)
1.6 gal (6 L) Engine Only
TNV DI Service Manual
VM
2
) or greater
(778 x 627 x 803 mm)
19.68 in. (500 mm) O.D.
7 blades suction type
2
)
2
)