Adding Engine Oil; Engine Oil Capacity (Typical) - Yanmar 3TNV82A Service Manual

GENERAL SERVICE INFORMATION

Adding Engine Oil

1. Make sure the engine is level.
2. Remove the oil cap (Figure 4-5, (4)).
3. Add the indicated amount of engine oil at the
top or the side engine oil filler port
(Figure 4-5, (5)).
4. Wait three minutes and check the oil level.
5. Add more oil if necessary.
6. Reinstall the oil cap (Figure 4-5, (4)) and
hand-tighten. Over-tightening may damage the
cap.
4-14

Engine Oil Capacity (Typical)

Note: These are the engine oil capacities
associated with a "deep standard" oil
pan. The oil capacity will vary dependant
upon which optional oil pan is used.
Refer to the operation manual provided
by the driven machine manufacturer for
the actual engine oil capacity of your
machine.
The following are the engine oil capacities for
various Yanmar TNV engines.
Engine Model
3TNV82A
3TNV84, 3TNV84T
3TNV88
4TNV84, 4TNV84T
4TNV88
4TNV94L
4TNV98, 4TNV98T
4TNV106(CL),
4TNV106T(CL)
4TNV106(VM),
4TNV106T(VM)
TNV DI Service Manual
Engine Oil
Dipstick Upper
Limit / Lower Limit
5.8 / 3.8 qt
(5.5 / 3.6 L)
7.1 / 4.1 qt
(6.7 / 3.9 L)
7.1 / 4.1 qt
(6.7 / 3.9 L)
7.8 / 4.2 qt
(7.4 / 4.0 L)
7.8 / 4.2 qt
(7.4 / 4.0 L)
11.1 / 6.3 qt
(10.5 / 6.0 L)
11.1 / 6.3 qt
(10.5 / 6.0 L)
14.8 / 5.3 qt
(14.0 / 5.0 L)
14.8 / 6.9 qt
(14.0 / 6.5 L)