Yanmar 3TNV82A Service Manual page 74

GENERAL SERVICE INFORMATION
Engine Model
Version
Engine Weight (Dry)
with Flywheel Housing*
PTO Position
Firing Order
Fuel Injection Timing
Direction of Rotation
Cooling System
Lubricating System
Normal Oil Pressure at
the Rated Engine Speed
Normal Oil Pressure at
the Low Idle Speed
Starting System
Dimensions (L × W × H)*
Engine Oil Pan
Capacity**
Engine Coolant Capacity
Standard Cooling Fan
* Engine specifications without radiator.
** Engine oil capacity for a "deep standard" oil pan. Refer to the operation manual provided by the driven machine
manufacturer for the actual engine oil capacity of your machine.
*** May vary depending on the application.
4-38
CL
546.8 lb (248 kg)
1-3-4-2-1 (No. 1 Cylinder on the Flywheel End)
See Checking and Adjusting Fuel Injection Timing on page 7-26
Counterclockwise Viewed From the Flywheel End
Liquid-Cooled with Radiator
Forced Lubrication with Trochoid Pump
42 - 57 psi (0.29 - 0.39 MPa; 2.96 - 3.98 kgf/cm
8.8 psi (0.06 MPa; 0.6 kgf/cm
Electric Starting - Starter Motor: DC12V, 3.1 hp (2.3 kW)
Alternator: DC12V, 40A***
Recommended Battery Capacity: 12V, 64 Amp-Hour (5h rating)
28.31 x 19.61 x 29.21 in.
11.1 / 6.3 qt (10.5 / 6.0 L)
(Dipstick Upper Limit / Lower Limit)
1.1 gal (4.2 L) Engine Only
16.14 in. (410 mm) O.D., 6 Blades Pusher Type
Principal Engine Specifications
4TNV98
518.2 lb (235 kg)
Flywheel End
2 ) or greater
(719 x 498 x 742 mm)
TNV DI Service Manual
VM
2
)