Yanmar 3TNV82A Service Manual page 60

GENERAL SERVICE INFORMATION
Engine Model
Version
Engine Weight (Dry)
with Flywheel Housing*
Firing Order
Fuel Injection Timing
PTO Position
Direction of Rotation
Cooling System
Lubricating System
Normal Oil Pressure at
the Rated Engine Speed
Normal Oil Pressure at
the Low Idle Speed
Starting System
Dimensions (L × W × H)*
Engine Oil Pan
Capacity**
Engine Coolant Capacity
* Engine specifications without radiator
** Engine oil capacity for a "deep standard" oil pan. Refer to the operation manual provided by the driven machine
manufacturer for the actual engine oil capacity of your machine.
*** May vary depending on the application.
4-24
CL
355.0 lb (161 kg)
1-3-2-1 (No. 1 Cylinder on the Flywheel End)
See Checking and Adjusting Fuel Injection Timing on page 7-26
Counterclockwise Viewed From the Flywheel End
Forced Lubrication with Trochoid Pump
42 - 57 psi (0.29 - 0.39 MPa; 2.96 - 3.98 kgf/cm
8.8 psi (0.06 MPa; 0.6 kgf/cm
Electric Starting - Starter Motor: DC12V, 1.6 hp (1.2 kW)
Recommended Battery Capacity: 12V, 60 Amp-Hour (5h rating)
23.19 x 19.13 x 24.49 in
(589 x 486 x 622 mm)
7.1 / 4.1 qt (6.7 / 3.9 L) (Dipstick Upper Limit / Lower Limit)
Principal Engine Specifications
3TNV84
341.8 lb (155 kg)
Flywheel End
Liquid-Cooled with Radiator
2 ) or greater
Alternator: DC12V, 40A***
22.20 x 19.13 x 24.49 in
(564 x 486 x 622 mm)
0.5 gal (2.0 L) Engine Only
TNV DI Service Manual
VM
2
)