Sharp TM200 Operation Manual page 70

e_tm200_7fm.book Page 70 Tuesday, November 9, 2004 9:14 PM
When sending SMS message of more than
160 characters, a confirmation message
C
appears. Press
cancel.
If the MMS or E-mail messages cannot be sent
for some reason, the message stays in the
"Outbox" and " " is displayed on the standby
screen.
Address Options
In step 5 of "Basic Operation" (page 11-69), you can use
following useful optional functions.
To select a destination from "Contacts list"
1
Press C [Options] (or press b) in step 5.
The "Options" menu appears.
2
Press a or b to highlight "Contacts list" press
B.
The "Contacts list" appears and you can search for
the phone number entering only the first few
characters. For information on how to search
"Contacts list" entries, refer to "Searching a Name
and Number in the Contacts List" on page 9-58.
To select a destination from "History"
In "History," the last 8 destinations sent using messages
(SMS, MMS or E-mail messages) are recorded.
11-70
A
[Yes] to send or [No] to
1
Press C [Options] in step 5.
The "Options" menu appears.
2
Press a or b to highlight "History" press B.
The destination list appears.
3
Press a or b to highlight the destination you
wish to send the message to and press B.
If you wish to delete one of the destinations from the
C
list, press [Options] and select "Delete" and
B
press .
To reselect the message type
After selecting "SMS," "MMS" or "E-mail message" in step
4 of "Basic Operation" (page 11-69), you can change to
another type of message later on.
3
Press C [Options].
The "Options" menu appears.
4
Press a or b to highlight "Change to SMS,"
"Change to MMS" or "Change to E-mail" and
press B.
The message type is reselected. Follow the
operation from step 6 of "Basic Operation" on
page 11-69.
To add recipients to the message
1
After entering a destination, press C [Options].
The "Options" menu appears.