Sharp TM200 Operation Manual page 46

e_tm200_7fm.book Page 46 Tuesday, November 9, 2004 9:14 PM
Using the Digital Zoom Function
1
At the main menu, select in the following order:
"Camera" → "Create photo" or "Create video."
2
Press d to zoom in (the subject becomes
larger) or press c to zoom out (the subject
becomes smaller.)
The zooming ratio indicators appear automatically
c d
when or is pressed and disappear when the
key is released.
The available zooming steps depend on the camera
settings.
The digital zoom function is not available when
picture size is set to "2 M pixel" in "Create photo"
mode.
Using the Delay Timer
1
At the main menu, select in the following order:
"Camera" → "Create photo" or "Create video."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Delay timer" and
press B.
7-46
4
Press a or b to highlight "On" and press B.
" " appears and returns to "Create photo/video"
mode.
5
Press B to start the delay timer.
10 seconds after the timer starts, the shutter sounds
and the camera takes a picture or starts recording
video.
To cancel the delay timer
1
Press C [Options] while the delay timer setting
is on.
The "Options" menu appears.
2
Press a or b to highlight "Delay timer" and
press B.
3
Press a or b to highlight "Off" and press B.
The delay timer turns off.
B
If is pressed while the delay timer is
operating, the picture is taken immediately.
If you wish to stop taking pictures with the
A
timer, press [Cancel] while the delay timer
is operating.