Sharp TM200 Operation Manual page 43

Hide thumbs Also See for TM200:
Table of Contents

Advertisement

e_tm200_7fm.book Page 43 Tuesday, November 9, 2004 9:14 PM
6
Press C [Options] and select "Save" and press
B to save the recorded video clip to "My videos."
If you wish to send saved video clips, refer to
"Sending Videos as Attachments" on page 12-108.
If you wish to send the video clip, refer to "Shooting
and Sending a Picture/Video Function" on
page 7-48.
While in "Create video" mode, you can switch
to "Create photo" mode. Press
display "Options" menu, select "Change to
camera mode," then press
If you wish to record video clips without sound,
C
press
[Options], select "Voice record" and
set it "Off."
The maximum size of a video clip that can be
recorded at one time is 295 kbytes.
Selecting Video Size
1
At the main menu, select in the following order:
"Camera" → "Create video."
2
Press C [Options].
The "Options" menu appears.
3
Press a or b to highlight "Video size" and
press B.
4
Press a or b to highlight "Large" or "Small" and
press B.
Selecting Video Quality
1
At the main menu, select in the following order:
"Camera" → "Create video."
2
Press C [Options].
The "Options" menu appears.
C
[Options] to
3
Press a or b to highlight "Video quality" and
B
.
press B.
4
Press a or b to highlight "Normal" or "Fine"
and press B.
Adjusting the Brightness of Video
Clips
In "Create video" mode, press
to adjust the brightness (exposure level) of video clips.
a
(brighter) or
Return to the standby mode to reset the
brightness setting to default.
b
(darker)
7-43

Advertisement

Table of Contents
loading

Table of Contents