Sharp TM200 Operation Manual page 39

e_tm200_7fm.book Page 39 Tuesday, November 9, 2004 9:14 PM
5
Press B.
The shutter sound is heard and the shot picture
appears.
6
Press W to save the picture.
The picture is saved to "My photos."
A
Press [Cancel] in this step. You can take the
picture again.
If you wish to send the taken picture, refer to
"Shooting and Sending a Picture/Video Function" on
page 7-48.
If you wish to leave "Create photo" mode
without saving the taken picture, press
before step 6.
While in "Create photo" mode, you can switch
to "Create video" mode. Press
display "Options" menu and select "Change to
video mode," then press
This handset uses a CCD sensor. Although this
handset has been manufactured carefully, some
pictures may still appear too bright or too dark.
If the handset has been left in a warm place for
a long time before taking or registering a
picture, the picture quality may be poor.
Pictures taken with the camera may differ from
the actual image of the subject in colour and
brightness.
Selecting the Picture Size
Pictures are saved in JPEG format in the following six
sizes.
2 M pixel:
1 M pixel:
Large:
Medium:
Small:
Tiny:
1
F
2
C
[Options] to
3
B
.
4
Selecting the Picture Quality
1
2
1224 × 1632 dots
858 × 1144 dots
768 × 1024 dots
480 × 640 dots
240 × 320 dots
120 × 160 dots
At the main menu, select in the following order:
"Camera" → "Create photo."
Press C [Options].
The "Options" menu appears.
Press a or b to highlight "Photo size" and
press B.
Press a or b to highlight the picture size you
wish to select and press B.
At the main menu, select in the following order:
"Camera" → "Create photo."
Press C [Options].
The "Options" menu appears.
7-39